Avaya 6424D+M User Manual page 45

If the call is an intercept call:
Press .
[CLASS]
1.
Incoming tie trunk group is displayed to identify the distant system.
2 .
.
Press
[CLASS]
Calling number is displayed if the call is from a voice terminal in a distant system.
Trunk group number is displayed for a trunk call.
3 . Press
.
[CLASS]
The COS is displayed if the call is from a voice terminal in a distant system. Trunk
number within the trunk group is displayed for a trunk call.
If the call is not an intercept call:
Press .
[CLASS]
1.
Calling number is displayed if the call is from a voice terminal in a distant system.
Trunk group number is displayed for a trunk call.
2 . Press .
[CLASS]
The COS is displayed if the call is from a voice terminal in a distant system. Trunk
number within the trunk group is displayed for a trunk call.
Attendant Auto-Manual Splitting
Allows you to announce calls privately and identify callers to voice terminal users. This
gives them the option of accepting or not accepting the call.
To extend an incoming call to an idle telephone/voice terminal:
1. Press DXS button for the desired extension number.
Listen for ringback tone. Caller is separated from the connection. SPLIT, BLF, and
RING lights go on. ANS light goes on.
answers. See Note.
If you activate Malicious Call Trace while a caller is split from the
Note:
console, the split condition is disabled. SPLIT light goes off. The
internal caller hears dial tone. The outside caller is disconnected.
2 .
Announce the call.
CHAPTER 4. OPERATING FEATURES
RING light goes off when terminal user
4-23