Avaya 6424D+M User Manual page 131

CHAPTER 8. TROUBLESHOOTING PROCEDURES FOR VOICE TERMINALS
List measurements commands display information about trunk, hunt, and attendant
groups. For example, trunk outage measurements are provided on the four trunks
that were out of service the most during a measurement period. Measurements of
lightly used trunks offer information on the five trunks in each trunk group that have
carried the fewest calls. Measurement displays may provide data that should be
referred to maintenance personnel.
The monitor system command provides a current system status report on line. The
report contains attendant and maintenance status, updated every minute, and traffic
status, updated once every hour. Attendant status shows the number of consoles
enabled and cancelled. Maintenance status shows the number of major and minor
alarms by category (trunks, stations, and other resources); it also shows whether or
not the remote maintenance facility has. been informed. Traffic status is of particular
interest to the System Manager. It shows the call-handling status of trunk groups,
hunt groups, and the attendant group. The System Manager can determine group
and queue sizes, number of active trunks, and number of queued calls in each group.
For detailed information on the use of the
refer to the following manuals:
AT&T System 85, SMT Administration
AT&T System 85, System Management, 555-103-108
DEFlNITY Manager II, Operation, 555-104-505
DEFINITY Communications System, Generic 2, Administration Procedures, 555-104-506
DEFINITY Communications System,
Hardware, 555-104-507
DEFINITY Communications System, Generic 2, Maintenance Procedures, 555-104-117
DEFINITY Communications
555-104-118
DEFINITY Communications
555-104-113
8-12
SMT (System 85) or Manager™ II (Generic 2),
Management, 555-103-501
Generic 2, Administration of Features and
System, Generic 2, Maintenance Repair Strategies,
System, and System 75 and System 85, Port Tester,