Avaya 6424D+M User Manual page 30

CHAPTER 4. OPERATING PROCEDURES
3. If Call Detail Recording and Reporting (CDRR) is assigned, do Steps 4 and 5; if not
assigned, go to Step 6.
4. Press .
[START]
Listen for dial tone. SPLIT light goes on. Caller is separated from the connection.
5. Dial CDRR account number access code and Account Charge Number.
Listen for dial tone.
6. Press DXS button for the desired extension number.
Listen for ringback tone. Associated BLF and RING lights go on.
7. Press
[RELEASE]
Display, ATND, and SPLIT lights go off. PA light lights. When the called extension
answers, RING light goes off. Caller is transferred.
Announcing an Incoming Trunk Call
To screen calls, you may be asked to announce calls to certain system users.
To announce a call:
1. Press the appropriate hundreds group select button.
Group select light goes on.
2. Check the BLF to see if the requested extension light is off. If the associated BLF
light is on and the extension
telephone/voice terminal, go to Step 3.
3. If Call Detail Recording and Reporting (CDRR) is assigned and calls are to be
charged to an account number, do Steps 4 and 5; if not assigned, go to Step 6.
4. Press .
[START]
Listen for dial tone. SPLIT light goes on. Caller is separated from the connection.
5. Dial CDRR account number access code and Account Charge Number.
Listen for dial tone.
Press DXS button for the desired extension number.
6.
Listen for ringback tone. Associated BLF and RING lights go on.
4-8
.
number is assigned to a multi-appearance