Connecting Power To An Ac-Powered Mx10003 Router - Juniper MX10003 Hardware Manual

8. Secure the grounding cable lug with the screws. The holes are sized for M5 pan head screws (see
Figure 26 on page 95).
9. Dress the grounding cable, and verify that it does not touch or block access to router components, and
that it does not drape where people could trip on it.
Figure 26: Connecting Grounding lugs to the MX10003 Router
SEE ALSO
General Safety Guidelines and Warnings | 177
General Electrical Safety Guidelines and Warnings | 206
Prevention of Electrostatic Discharge Damage | 182

Connecting Power to an AC-Powered MX10003 Router

CAUTION:
to the router might occur.
Do not mix AC and DC power supplies within the same router. Damage
95