Configure The Sip Accounts; Configure The Voip Service - Zte H1600 Maintenance Management Manual

ZTE H1600 Maintenance Management Guide

6.2 Configure the SIP Accounts

This procedure describes how to configure basic parameters of the
ing SIP account, authorization username and password.
Steps
1. On the main page of the ZTE H1600 device, select VoIP > Telephone Number to
open the SIP Account page, see
Figure 6-2 SIP Accounts Page
2. Set the parameters.
Table 6-1 Description of the SIP Account Parameters
Parameter
Enable
SIP Account
Authorization User-
name
Password
3. Click Apply button to apply the changes.

6.3 Configure the VoIP Service

This procedure describes how to configure additional services for the SIP-based VoIP
service on the ZTE H1600.
68
Figure
Table 6-1 describes the SIP account parameters .
Description
Click On to enable the account service.
Registered name of a SIP subscriber. Normally, it is the phone number
of the subscriber.
Username for authentication by the SoftSwitch system, which must be
the same as that configured in the SoftSwitch system.
Password for VoIP service authentication by the SoftSwitch system,
which must be the same as that configured in the SoftSwitch system.
SJ-20210621164956-008 | 2022-09-01(R1.3)
6-2.
VoIP service, includ-