Configure The Mulitcast; Configure The Igmp; Configure The Mld - Zte H3140 Maintenance Management Manual

H3140 Maintenance Management Guide
Parameter
3. Click Apply button to apply the changes.

4.8 Configure the Mulitcast

4.8.1 Configure the IGMP

Abstract
The IGMP
sent by the
ets.
Steps
1. On the main page of the H3140, select Internet > Multicast > IGMP to the IGMP
page, see
Figure 4-24 IGMP Configuration Page
2. Enable the IGMP functions, see
Table 4-18 Parameter Descriptions for the IGMP
Parameter
IGMP Proxy
3. Click Apply button to apply the changes.

4.8.2 Configure the MLD

Abstract
When the
stream host to send MLD messages and maintain the group member relationship, and
40
function in the IGMP PROXY mode is to act as agent for the IGMP packets
OLT equipment and forward them according to the information in the pack-
Figure 4-24.
Description
The system serves as a proxy server to forward IGMP packets
from the
MLD proxy function is enabled on H3140, H3140 can enable the proxy down-
Description
header of data packets to classify service types and distin-
guish service priorities.The value range of DSCP is 0~63
and each DSCP code value is mapped to a defined
Per Hop Behavior) code.
Table 4-18.
MDU/DSLAM to other devices.
SJ-20210621164956-009 | 2021-12-07(R1.0)
PHB (