4.7 Configure the SNTP
Abstract
Set the H3140 clock synchronization server information and time zone information so
that the user can see that the system time is consistent with the local time.
Steps
1. On the main page of the H3140, select Internet > SNTP to the SNTP page, see
ure
4-23.
Figure 4-23 SNTP Configuration Page
2. Configure the SNTP parameters.
Table 4-17
Table 4-17 Parameter Descriptions for the SNTP
Parameter
Time Zone
NTP Server1 ~ NTP Server5
Poll Interval
Automatically Adjust Clock For Day-
light
DSCP
SJ-20210621164956-009 | 2021-12-07(R1.0)
lists the SNTP parameters.
Description
Time zone where the device is located.
IP address of the primary/secondary/third/fourth/fifth NTP
server.
Interval of time synchronization.Unit: second.
Enable or disable the automatically adjust clock for daylight
function.
To ensure the QoS of communication,
ed Services Code Point) encodes the 8 flag bytes in the IP
4 Configure the Internet
Fig-
DSCP
(Differentiat-
39