Display; Password; Operation, Value Entry - Trane CCE-Compact Series Installation Operation & Maintenance

Air handling unit
Table of Contents

Advertisement

12.2 Display

The display is divided into several areas:
Headline
Password level
Further lines
Headline
Further lines
Current line / total lines
Submenu
Values, states
The language can be selected via All settings
Depending on the configuration of the AHU, more or less lines are displayed.

12.3 Password

For every entry a password is needed (except language selection); the current access level is dis-
played in the left top corner:
No key
1 key
After 10 minutes the display makes an automatic logout and returns to the main / start page.

12.4 Operation, value entry

For the operation of the display, the rotary button and the ESC-button are primarily used. The rotary
button is used to select the desired line. Depending on the type of line a value / state is displayed, a
setpoint is entered, a setting is made or a submenu is selected.
62/115
29.07.11 13:32
Stop/Alarm
All settings
Operating mode
Outdoor temp.
Supply temp.
Return temp.
Supply flow
Return flow
Figure 82: Start page
on the main / start page: date, time and AHU state
in a submenu: the current selected submenu
arrows indicate additional lines above/below
current selected line / total number of lines
submenu, press Ok to go into the submenu
display the current values, states and the setpoints / settings
level 253
no change of settings possible, only a few parts
of the menus are visible
(language selection is always possible)
level 6
user level, change of setpoints / settings
level 5
extra user level, special settings
Password for user level
1000
1/8
Off
13.2°C
21.7°C
20.3°C
5301m3/h
5298m3/h
.
Line
current / total
Submenu
Values, states
V07-19.0

Advertisement

Table of Contents
loading

Table of Contents