Table of Contents
Advertisement
Figure 43: Loosen the clamps
Figure 44: Slide in the filters
Figure 45: Clamping the filters
Attention: For soft bags the lower bags of the filter cells need to lift up in order
to prevent damage with the clamping system (Figure 46)!
Figure 46: Lifting the filter bags
Attention: If different widths of filter are planned for one filter frame with clamp-
ing mechanism, then the order of the insertion has to be according to the filter
frame raster (see figure beneath). Otherwise it leads to an air bypass.
Figure 47: filter frame for different filter
Figure 48: consider the order accord-
Figure 49: filter section with in-
sizes
serted filters
ing the filter frame raster
V07-19.0
33/115
Advertisement
Table of Contents
