Table of Contents
Advertisement
-
-
5.4
Airfilters
-
Filters, with the exception of laterally removable prefilters, are supplied loose and must be in-
stalled on site.
Ensure proper insertion of the filters (the bound filter media side on the unclean air side).
-
-
During the installation it must be noted, that the filter bags will not be clamped or damaged.
Each filter bag must freely adjust itself in the airstream.
-
If the filters are not included in the scope of delivery of TRANE, it must be considered that the
used filters fulfills the requirements of VDI 6022.
Incorrectly mounted filters can be sucked in by the fan and lead to considerable
damage..
5.4.1
Laterally removable bag filters with clamping mechanism
When inserting and fixing the laterally removable bag filters with a clamping mechanism, proceed
cautiously, so as not to damage them. The installation of laterally removable bag filters must be car-
ried out as follows:
1. First, move all levers of the clamping rails toward the door opening (Figure 43).
2. Slide one filter after the other in the filter frame (Figure 44).
3. Press the last filter of the row against the rear panel. Then press with the lever the filter cells
against the sealing (Figure 45).
32/115
Figure 42: Closed position
It is not permitted to drill in the damper, otherwise it may cause damage
to the gear wheels and the function of the damper is no longer ensured.
The dampers must not be strained.
V07-19.0
Advertisement
Table of Contents
