Bacnet Ms/Tp - Trane CCE-Compact Series Installation Operation & Maintenance

Parameter
Response timeout Response timeout setting [5 s]
Termination
General
Software version
Device ID
Module
Use default
Table 37: Modbus RTU configuration
22.2.2

BACnet MS/TP

Parameter
State
Comm failure
BACnet:
Device name
Device ID
Address
Imperial unit
system
Unicode
Description
language
Security level
Alarm server ID
Alarm device ID1
Alarm device ID2
Comm mapping
Interface:
V07-19.0
Value Description
Even Even parity
Odd Odd parity
Enable termination resistor [Passive]
Passive No termination
Active Termination
Module configuration/info
Display software version
Display device ID
Display module information
Active Set back to the default settings
Value Description
Display hardware state of the module
Display communication error
Passive No communication error
Active Communication error
Configuration of the BACnet side
Device name setting [POL904_......]
Device ID setting [4194303]
BACnet MS/TP address setting [18]
Use of imperial unit system [No]
No Metric unit system
Yes Imperial unit system (inch, °F, ...)
Enable Unicode [Passive]
Description language setting for data point list [English]; do not change it!!
Security level setting [0]
Alarm server ID setting [1]
Alarm device ID1 setting [0]
Alarm device ID2 setting [0]
Used mapping setting [16384 = COM1]; do not change it!!
Configuration of the physical interface
95/115