Table of Contents
Advertisement
Depending on the material used and the environmental conditions, a superficial corrosion may
-
occur on components like e.g. motor shafts, fan shafts, clamping bushes, sheet cutting edges,
and so forth. The resulting corrosion layer protects the underlying material from further corroding
and does not represent a defect of the component or the device (see also chapter 9).
The packaged delivered goods may include multiple parts of the device. In this
case, each part is secured against falling. Attention: narrow parts may tip over after
removing the safeguard. Secure narrow parts against tipping over!
Thin sheet metals like roof, edges or fins are a source of injury! Gloves, safety
shoes and long work clothes must be used.
Devices shall not be climbed. If unavoidable: weight must be compensated by use of boards.
3.2
Lifting by forklift / lift truck
In accordance with the TRANE drawing the AHU will be delivered as monobloc or more delivery
section(s). The AHU parts or the monobloc are delivered on pallets and can be unloaded and
moved by forklift or lift truck. Forces must always act on the base frame, see Figure 2.
Figure 2: Transport correct
16/115
Figure 1: Do not climb on the AHU!
Figure 3: Transport incorrect
V07-19.0
Advertisement
Table of Contents
