Center of gravity must be centrally located between the forks (see Figure 4). For large parts use
several lift trucks.
For the overlifting directly by crane from the truck applies the following chapter 3.3
(Lifting of CCE Compact AHUs).
3.3
Lifting of CCE Compact AHUs
The AHU of the series CCE Compact in basic form is usually delivered as monobloc, see Figure 5.
If there are any additional AHU sections, the same specifications apply for lifting the AHU, which are
described below.
V07-19.0
Figure 4: Center of gravity centrally between the forks
Figure 5: Delivery AHU monobloc
17/115