Removing And Installing Handle For Shift Mechanism; Removing And Installing The Cover For The Shift Mechanism; Removing And Installing Handle For Shift Mechanism", Page - Skoda Fabia II 2007 Workshop Manual

Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Octavia II 2004 ➤ ...
Gearbox 0AM-DSG - Edition 01.2015
– Insert the plug connection -C- for lamp for selector lever scale
illumination - L101- .
Note
When inserting the plug connection -C- ensure that the contact
♦
pins of the lamp for selector lever scale illumination - L101-
are not bent and that the retaining lugs of the cover do not
break off.
Ignore pos. -A-, -B- and -1-.
♦
As of production date 06.2009 the shift mechanism is
♦
changed, the 4-pin plug connection -B- and the selector lever
lock solenoid - N110- -1- are already located in the shift mech‐
anism
⇒ "2.1 Summary of components - Gearshift mechanism", page
97 .
– Clip cover for shift mechanism into centre console.
2.6 Removing and installing handle for shift
mechanism
⇒ "2.6.1 Removing and installing handle for shift mechanism up
to 11.2012 (CW 45)", page 112
⇒ "2.6.2 Removing and installing handle for shift mechanism as
of 11.2012 (CW 45)", page 114
2.6.1 Removing and installing handle for shift
mechanism up to 11.2012 (CW 45)
Special tools and workshop equipment required
♦ Hose binding claw - V.A.G 1275-
Removing
– Removing the cover for the shift mechanism
⇒ "2.5 Removing and Installing the cover for the shift mecha‐
nism", page 109 .
– Pull out the lock button above its pressure point and secure it
with a cable strap or a suitable wire.
This can prevent the button being inadvertently pressed into the
handle.
Vehicles Octavia II and Yeti
112
Rep. gr.34 - Controls, housing