Table of Contents
Advertisement
Table 146 Management > Maintenance > Firmware Upgrade
LABEL
File Path
Upgrade
35.7 Restore Configuration
Use this screen to restore a previously saved configuration from your computer to the Switch.
Figure 207 Management > Maintenance > Restore Configuration
Type the path and file name of the configuration file you wish to restore in the File Path text box or click
Choose File or Browse to locate it. After you have specified the file, click Restore. "config" is the name of
the configuration file on the Switch, so your backup configuration file is automatically renamed when
you restore using this screen.
35.8 Backup Configuration
Backing up your Switch configurations allows you to create various "snap shots" of your device from
which you may restore at a later date.
Back up your current Switch configuration to a computer using the Backup Configuration screen.
Figure 208 Management > Maintenance > Backup Configuration
Follow the steps below to back up the current Switch configuration to your computer in this screen.
Select which Switch configuration file you want to download to your computer.
1
Click Backup.
2
Chapter 35 Maintenance
DESCRIPTION
Type the path and file name of the firmware file you wish to upload to the Switch in the File
Path text box or click Choose File or Browse to locate it.
Click Upgrade to load the new firmware. Firmware upgrades are only applied after a
reboot. To reboot, go to Management > Maintenance > Reboot System and click Config 1,
Config 2 or Factory Default (Config 1, Config 2 and Factory Default are the configuration
files you want the Switch to use when it restarts).
XS1930 Series User's Guide
286
Advertisement
Table of Contents
Troubleshooting
