Neighbor Detail - ZyXEL Communications XS3800-28 User Manual

Figure 70 Status > Neighbor
The following table describes the fields in the above screen.
Table 23 Status > Neighbor
LABEL
Port
Port Name
Link
System Name
IPv4
IPv6
Flush

7.2.2 Neighbor Detail

Use this screen to view detailed information about the neighboring devices. Device information is
Chapter 7 Status
DESCRIPTION
This shows the port of the Switch, on which the neighboring device is discovered.
This shows the port description of the Switch.
This shows the speed (either 10M for 10 Mbps, 100M for 100 Mbps, 1G for 1 Gbps, or 10G for
10 Gbps) and the duplex (F for full duplex or H for half). This field displays Down if the port is
not connected to any device.
This shows the system name of the neighbor device.
This shows the IPv4 address of the neighbor device. The IPv4 address is a hyper link that you
can click to log into and manage the neighbor device through its Web Configurator.
This shows the IPv6 address of the neighbor device. The IPv6 address is a hyper link that you
can click to log into and manage the neighbor device through its Web Configurator.
Select an entry's check box to select a specific port. Otherwise, select the check box in the
table heading row to select all ports.
Click the Flush button to remove information about neighbors learned on the selected
ports.
XS3800-28 User's Guide
101