Table of Contents
Advertisement
58
OPERATION
blinks red.
If a warning light appears in the TFT display:
Take action to avoid potential danger.
Setting distance
Briefly press button 1.
The set distance is briefly shown in the
display.
WARNING
Selected distance is too short for the
traffic situation
Risk of accident
Adjust the distance according to the
traffic and weather conditions.
Maintain the legally prescribed safety
distance.
Repeatedly press the button 1 briefly until
the distance has been set.
The following settings are available:
Short distance
Medium distance
Long distance
If the ACC detects an object ahead that
is moving in the same direction, this is vi-
sualized by adding a car to the displayed
icon.
The distance adjustment remains
unchanged for six hours after the ignition
has been turned off. In case of a restart,
the following setting is preselected:
Medium distance
HILL START CONTROL
with Hill Start Control
Activating and deactivating
theHill Start Control
Switching on the ignition (
Go to the
Settings
activate or deactivate the menu item
Start Control
The icon 1 for Hill Start Control is displayed
in the upper status line and in the Pure Ride
view.
Operating Hill Start Control
Requirement
Vehicle is at a standstill with engine running.
Hill Start Control is switched on.
ATTENTION
Failure of the drive-off assistant
Risk of accident
Secure the vehicle through manual brak-
ing.
Hill Start Control is only a convenience
system for easier hill-starting and
should, therefore, not be confused with a
parking brake.
OE
44).
,
menu, then
Assist
.
Hill
Advertisement
Chapters
Table of Contents
