Table of Contents
Advertisement
tle grip position) should remain
constant both prior to and dur-
ing execution of shifts using the
Pro gearshift assistant. Changing
the accelerator twist-grip posi-
tion during the gear-shift oper-
ation may cause the function to
abort and/or the gear change to
fail. The Pro gearshift assistant
does not provide support when
gear changes are made using the
clutch.
Downshifts
Downshifts are assisted up to
the speed at which the engine
reaches maximum rpm in the
gear to be engaged. Over-
revving is thus prevented.
Maximum engine speed
max 9000 min
-1
Upshifts
Upshifting is only possible if
the current RPM is higher than
the release threshold for the
next higher gear.
This prevents the idling speed
from being dropped below.
Idle speed
-1
1050 min
(Engine at operat-
ing temperature)
Release thresholds
1st gear
-1
min 1350 min
2nd gear
min 1400 min
-1
3rd gear
min 1450 min
-1
4th gear
Release thresholds
-1
min 1500 min
5th gear
-1
min 1550 min
6th gear
-1
min 1600 min
Hill Start Control
(Hill Start Control)
Hill Start Control function
The Hill Start Control prevents
an uncontrolled rolling back on
slopes by means of targeted in-
tervention in the partial integral
ABS brake system, without the
rider having to continuously op-
erate the brake lever. When Hill
Start Control is activated, pres-
sure builds in the rear brake sys-
tem so that the motorcycle re-
mains stationary on a sloping sur-
face.
8
153
z
Advertisement
Table of Contents
