Mounting Options; Table 2-1 Installation Locations - Honeywell HTR62 Installation And Operating Manual

Mounting Options

Rev 1.01
Table 2-1 lists recommended location options.
Location
Bottom of glove box -
horizontal mount
Inside glove box - horizontal,
vertical mount
Bottom of passenger seat
behind bus driver - horizontal
mount
Underneath bulkhead -
horizontal mount
Front of bulkhead - vertical
mount
Console - horizontal mount
Console - vertical mount
Beside driver seat - horizontal
mount
Caution Honeywell recommends that you do not install the HTR62 on the
transmission access hatch. This location has the highest level of
vibration (and may be subject to water damage).
The VCR enclosure can be mounted:
• Horizontally, either upright or inverted, as shown in
• Vertically with the cassette opening pointing up.
HTR62 Installation and Operating Guide
Table 2-1 Installation Locations
Convenient Easy to
operation install
5
Low Good air
vibration flow
Figure 2-1.
Document 900.0341
12/05