Table of Contents
Advertisement
Quick Test for Remote Video
Checklist for View Software
Select a site
to connect to
and click
Maintain
Obtaining Live Video
44
Refer to the
Rapid Eye™ Hybrid HD and Hybrid LT Digital Video Recorders System
Administrator
Guide, about using the View application to:
1.
Run View.
2.
Log on to the Rapid Eye database.
3.
Using View, run a Maintenance session at the Rapid Eye site, to check if the
connection is set up. After one Maintenance Session runs, the site is ready for further
configuration and operation.
4.
Check if the connected camera(s) in a powered ON state are showing video feeds.
5.
Set the time of the Rapid Eye Hybrid LT DVR.
Figure 3-2
Running a Maintenance Session
Refer to the
Rapid Eye™ Hybrid HD and Hybrid LT Digital Video Recorders Common
Operator
Guide, about using View to run a Live session and obtain video.
Advertisement
Table of Contents
