Ending A Live Session; Customizing Windows For A Pc Monitor's Settings; Table 2-1 Display Properties In Microsoft Windows - Honeywell Rapid Eye Operator's Manual

Ending a Live Session

Customizing Windows for a PC Monitor's Settings

Document 800-07767 Rev A
02/11
Close the tear-away player window or click Disconnect on the View toolbar. This also
closes other sessions such as retrieval or alarm at the site. The Live indicator disappears
beneath the site on the Site action tab. Ending a live session discards all video feeds. A live
session also ends when you exit View.
Using Microsoft Windows
If operators plan to use View's higher resolution settings, set the Screen area (for the
monitor running View) to 1280 by 1024 pixels or higher. Microsoft Windows is used to set
this value, not the View application. Other recommended values are listed in
PC monitor's refresh rate can also be changed. Not all monitors and video cards support
the resolutions indicated in
Windows, your monitor, and the video card for more information.
Table 2-1 Display Properties in Microsoft Windows
Screen Area (Pixels)
1600 by 1200
1280 by 1024
1280 by 960
1152 by 864
1024 by 768
800 by 600
a
For higher video resolutions.
b
Dial-up connections using few cameras are faster, as is retrieval of video recorded at
lower resolutions. Lower settings for screen area may be sufficient for such use.
c
Video is visible and workable even when using smaller screen area settings.
Rapid Eye Remote View Operator Guide
2-1. Consult the documentation supplied with Microsoft
Table
For Multi-Media DSP For Multi-Media, Multi-Media LT
a
(recommended) and Over Dial-Up Connections
Yes Yes
Yes Yes
Yes Yes
c
No Yes
No Yes
No No
2-1. The
Table
c
b
37