Playing Recorded Video Using Mark In And Mark Out Points In The Timeline; Creating A Loop By Adding A Mark In And Mark Out Point In The Timeline - Honeywell MAXPRO NVR XE Operator's Manual

P
P O IN T S IN T H E T I M E L I N E
Mark in and Mark out feature is useful when you want to play a portion of video repeatedly.
You can add a mark in point to mark the start date and time in the timeline. To mark the end
date and time, add a mark out point in the timeline. The portion of the timeline between a mark
in and mark out point is referred to as a loop.
You can add bookmarks between a loop to identify moments of interest in the video. See
Marking points of interest in the timeline using bookmarks
can also be saved as a clip. See
C
TIMELINE
To create a loop
1.
2.
3.
MAXPRO NVR Operator's Guide
Command
Save Image As
Show Surrounding Cameras
L A Y I N G R E C O R D E D V I D E O U S I NG M A R K I N A ND M A R K O U T
REATING A LOOP BY ADDING A MARK IN AND MARK OUT POINT IN THE
Click to select the timeline in the Timeline window in which you want to add mark in and
mark out points.
Or
Click a panel displaying video to select the corresponding timeline.
To set the start date and time of the loop, add a mark in.
To add a mark in
Click the point in the timeline where you want to add a mark in and click
Alternatively, you can right-click the point in the timeline where you want to add a
mark in and click Add Mark In in the context menu. The mark in can also be added
from a panel displaying video. Right-click the panel and click Add Mark In in the
context menu. The mark in is added at the corresponding date and time in the
timeline.
To set the end date and time of the loop, add a mark out.
To add a mark out
To add a mark out, click the point in the timeline where you want to add a mark out
and click . Alternatively, you can right-click the point in the timeline where you want
to add a mark out and click Add Mark Out in the context menu. The mark out can
also be added from a panel displaying video. Right-click the panel and click Add
Mark Out in the context menu. The mark out is added at the corresponding date and
time in the timeline.
Note:
You can add multiple mark in and mark out points in the same timeline. However,
you cannot add two mark in points in succession. A mark out point needs to be
added after each mark in point.
Click to...
save the frame displayed in the panel in
different image formats such as JPG, PNG,
and GIF.
See Saving images
to view video from the associated cameras.
See Surrounding Cameras
on page 58. The video in a loop
Creating clips on page 62.
M O N I T O R I N G A S I T E
Timeline
on page 62.
on page 51.
.
57