Table of Contents
Advertisement
[1 Histogram]: Shows signal strength distribution for the school(s) of fish marked with
an estimate mark on the display.
[2 TD Position Mark]: The TD position mark indicates transducer position. The mark
can be turned on or off. See section 1.4.3.
9.2.4
[Mark Color & Size] menu
The [Mark Color & Size] menu sets the color and size of marks. To show this menu,
open the [Mark & Operation Support Tool] menu, then select [3 Mark Color & Size].
[1 Mark Color]: Select the color for the event mark, fish mark and fish estimate mark.
The colors available are white, light blue, blue, yellow, purple, or green. Color cannot
be assigned to individual categories of marks.
[2 Trackball Mark]: Sets the size of the trackball mark, normal or large.
[3 Target Lock Mark]: Sets the size of the target lock mark, normal, large, or small.
[4 Target Vector]: You may display the target vector in short, normal, or long lengths.
Set "long" for slow moving target; "short" for faster moving target.
[5 Event Mark]: Sets the size of the event mark, normal, large, or small.
[6 Event Mark]: Sets the size of the fish mark, normal, large, or small.
[7 Own Ship Position Mark]: Sets the size of the own ship position mark, normal,
large, or small.
[8 Own Ship Mark]: Sets the size of the own ship mark, normal, large, or actual. For
actual size, the size of the own ship mark changes with the detection range.
[9 Net Shoot Mark]: Sets the size of the net shoot mark, normal, large, or small.
[1 Estimate on Scan]: Sets the size of the fish estimate mark on the display. The
choices are normal or large.
[2 Current Vector]: Sets the length for the current vectors. The choices are normal,
long, normal/thick, or long/thick.
Left click
Left click
9. OTHER SETTINGS
9-5
Advertisement
Table of Contents
