How To Show/Hide The 3D Objects; How To Start/Stop The 3D Picture Drawing; Display Mode - Furuno FSV-75 Operator's Manual

[Auto Swivel ON/OFF]
button
[Density CALC ON/OFF]
button
[Current Layer Mark ON/
OFF] button
5.3.6

How to show/hide the 3D objects

Left-click the object ON/OFF button at the top left of
the display to show/hide the objects listed below.
When the 3D objects are shown, the button reads
When hidden, the button reads
• Event mark
• Range ring
• Plumb line
5.3.7

How to start/stop the 3D picture drawing

Left-click the drawing start/stop button at the top left of
the display to start/stop the 3D picture drawing.
The label on the button reads
drawing is stopped. Left-click the button to start the
drawing. The label on the button then reads
5.4 3D Display Mode
There are three 3D display modes,
sweep cross-section, tilt cross-section,
and forward detection history. To change
the 3D display mode, left-click an appro-
priate button for the 3D display mode.
The button of the active mode is highlight-
ed in blue.
Name
Left-click the button to start the auto swivel function. Then,
the 3D display makes one rotation. The rotation direction
can be selected from the [Swivel Direction Forward/Re-
verse] button or menu. See section 5.15.1.
Activate/deactivate the density calculation function. See
section 5.11.
Show/hide the current layer mark, which can be shown or
hidden from the menu. See section 5.13.8.
Hide
• Fish mark
• Scale
Description
.
Show
.
while the 3D picture
.
Sweep cross-section mode Sweep cross-section mode
Tilt cross-section mode Tilt cross-section mode
Forward detection history mode Forward detection history mode
5. 3D MODE
Object ON/OFF Object ON/OFF
button button
• Net course mark
• Detection beam area
Drawing start/stop Drawing start/stop
button button
5-7