Table of Contents
Advertisement
5. 3D MODE
5.11.2
How to adjust the calculation area size
Do as follows to adjust the calculation area size for the density calculation function:
1. Open the menu.
2. Select [7 3D Functions], then left-click.
3. Select [7 Density Calculations], then left-click.
4. Select [1 Calculation Area], then left-click.
5. Adjust the values for [1 Length], [2 Width] and [3
Height] to adjust the calculation area size.
(Bow-stern direction)
6. Close the menu.
5.11.3
How to customize coefficient setting
Do as follows to customize coefficient setting for the density calculation function:
1. Open the menu.
2. Select [7 3D Functions], then left-click.
5-18
Length
Width
(Port-starboard direction)
Height
(Depth direction)
Advertisement
Table of Contents
