Table of Contents
Advertisement
7. HOW TO CUSTOMIZE THE SONAR
7.3.2
How to program the USER PROG control
1. Set the display appropriately, according to fishing ground, fish-
ing objective, etc.
2. Open the menu.
3. Left-click [5 Record/Recall/Register].
4. Left-click [7 Register].
5. Left-click [2 Assign User Program]. A confirmation message
appears.
6. Left-click [Yes]. The window shown to the right appears.
7. Left-click desired program no. A checkmark ( ) appears to the
left of your selection. You can program 10 settings (P1 to P10).
8. Click [Quit] on the setting box to close the box.
9. Close the menu.
7.4
Remote Controller (option)
The keys of the remote controller can be reprogrammed with the functions of your
choice.
1. Open the menu.
2. Left-click [5 Record/Recall/Register].
3. Left-click [7 Register].
4. Left-click [6 Remote Key Setting].
Note: The settings for [7 CH7] through [1 CH10] are only available when an ex-
ternal switch is connected to the TB1 port of the Processor Unit.
7-8
Ch1
Ch3
Ch2
Ch4
Ch5
Ch6
Advertisement
Table of Contents
