Table of Contents
Advertisement
4. FISH FINDER MODE
4. Select [2 STC Level], then left-click.
5. Left-click the
The larger the value the more surface echoes are erased. A setting
of [0] disables the STC. In setting 10, STC deletes unwanted
echoes from the surface to about 16 ft. Avoid setting the STC too
high; fish echoes near the surface may be erased.
6. Select [Quit], then left-click.
7. Close the menu.
4.13
How to Customize the Colors for Fish Finder Dis-
play
You can arrange the display color to your liking by changing the color arrangement on
the color bar.
1. Open the menu.
2. Select [6 Fish Finder], then left-click.
3. Select [8 Color Setting], then left-click.
4. Select the color you want to customize, then left-click. The [Color Setting] window
appears inside the menu.
5. Select one of the following methods as desired:
Select from the 32 preset colors
Select the new color from the left column, then left-click.
4-8
or
button to select the desired setting.
Left-click the
color you want
to customize.
The arrow (►)
indicates the
selected color.
When you select a
new color from the
left column, the
indicated location's
color also changes.
Left-click here to
create a new color
from the mixing
palette.
Advertisement
Table of Contents
