Table of Contents
Advertisement
9. OTHER SETTINGS
9.3.6
[Interface Setting] menu
The [Interface Setting] menu sets the baud rate to use with the NMEA ports. To display
the menu, open the [Installation Setting] menu, then select [5 Interface Setting].
[1 NMEA1 Baud Rate] to [5 NMEA5 Baud Rate]: Set the baud rate for each NMEA
port. The choices are [4800bps], [9600bps], [19200bps], [38400bps].
9.3.7
[External Data] menu
The [External Data] menu sets up the data received from external equipment. To dis-
play the menu, open the [Installation Setting] menu, then select [6 External Data].
[1 Date & Time]: Sets the input format for the date and time data, [Disable] or [NMEA].
[2 Heading]: Sets the input format for the heading data [Disable], [AD10], or [NMEA].
[3 Speed & Course]: Set the input format for the speed and course data, [Disable],
[NMEA (SOG)], or [NMEA (STW)].
[4 Speed Sensor]: Sets the type of device to use as the speed and course data source,
[Disable], [GPS/DR], or [DOPPLER/DR].
[5 LAT/LON]: Sets the input format for the position data, [Disable] or [NMEA].
[6 Water Depth]: Sets the input format for the water depth data, [Disable] or [NMEA].
[7 Water TEMP]: Sets the input format for the water temperature data, [Disable] or
[NMEA].
[8 Water Current]: Sets the input format for the water current data, [Disable] or [NMEA].
[9 Wind]: Sets the input format for the wind data, [Disable] or [NMEA].
[1 Net Depth]: Sets the input format for the net depth data, [Disable] or [NMEA].
9-16
Left click
Left click
Advertisement
Table of Contents
