Furuno FSV-75 Operator's Manual page 198

10. MAINTENANCE
10.10.2 Operation test
The operation test check the operational status of each unit in the system. To conduct
this test, select [1 Operation Test] from the [Test] menu.
Press the MENU/ESC key to close the results.
Processor Unit
Control Unit
*
For any NG, contact your dealer for advice.
How to read the test results
(1) Processor unit information and status results.
[Product Grade]: When the 3D function is unlock, "FSV-75-35" appears. For
others, "FSV-75" appears.
[RAM]: Indicates the RAM status; "OK" (white text) or "NG" (red text).
[Battery]: Indicates the backup battery's charge. If the charge is 2.6V or less,
consult your local dealer for battery replacement.
(2) Control unit information and status results.
[ROM]/[RAM]: Indicates the ROM and RAM status; "OK" (white text) or "NG"
(red text).
*: Appears only when a second control unit is connected.
(3) Transceiver unit information and status results.
[ROM]/[RAM]: Indicates the ROM and RAM status; "OK" (white text) or "NG"
(red text).
[+B] in [PWR] section: Indicates +B voltage.
(4) Hull unit control box information and status results.
10-10
865-XXXX-XX.XX
105-XXXX-XX.XX
Product Grade = FSV-75
RAM = OK
EWF = Enable
MAC Address = ********
IP Address = ********
Subnet Mask = ********
Monitor1 = 1280x1024
Monitor2 = 1280x1024
USB1 =
USB2 =
USB3 =
USB4 =
SSD = OK
CPU Temp = 32.0°C
Board Temp = 20.0°C
Battery = 3.2V
865-XXXX-XX.XX
865-XXXX-XX.XX
105-XXXX-XX.XX
ROM = OK
RAM = OK
865-XXXX-XX.XX
865-XXXX-XX.XX
105-XXXX-XX.XX
ROM = OK
RAM = OK
Press Menu/Esc key to cancel.
OPERATION TEST
Transceiver
TRCPU
TRX
PWR
Control Box
HMS
HCTL
HULL
TD
OK: Status is normal; NG: Error detected
105-XXXX-XX.XX
105-XXXX-XX.XX
105-XXXX-XX.XX
ROM = OK S1 00000000(00)
RAM = OK S5 0000(0)
DATA = OK S8 0000(0)
S9 0000(0)
MAC Address = ********
IP Address = ********
Subnet Mask = ********
0 0 0 0 0
12V = 12.0V
+B = 120.3V
105-XXXX-XX.XX
Axcel = OK
Gyro = OK
Pitch = -0.9
Roll = -1.4
105-XXXX-XX.XX
test = OK
Position = 0mm(0)
UP_LSW = 0mm(0)
TX_LSW = 430mm(43)
DN_LSW = 770mm(77)
Temp = 52.8°C
XX: Program number