Table of Contents
Advertisement
3. ADJUSTMENTS AND CHECKS
3.10
How to Configure the Own Ship Mark
Set your ship's length and width and the position of the transducer, to accurately dis-
play the own ship mark on the screen.
1. Access the System menu, referring to section 3.1.
2. Select [Own Ship Mark] then left-click.
3. Select [Ship's Length] then left-click.
4. Use the scrollwheel to set length. The setting range is 15 to 150 m.
5. Set ship's width and transducer positions similarly.
• [Ship's Width]: The width of the ship at
its widest point. (Setting range: 5 to 30
m)
• [TD Position 1]: Distance from transduc-
er to bow. (Setting range: 5 to 50 m)
• [TD Position 2]: Distance from transduc-
er to keel. Select "+" for starboard, "-" for
port. (Setting range: -10 to 10m)
6. Long-press the MENU/ESC key to close
all menus.
3-10
TD Position 1
TD Position 2
(Negative value
for port)
Ship's Width
Ship's
Length
Advertisement
Table of Contents
