Siemens SIMATIC ET 200M Operating Instructions Manual page 78

Connecting
5.3 Connecting PROFINET IO
Required accessories
● Cable with maximum 2.5 mm
● PROFINET connector according to the specifications in the "PROFINET installation
● Industrial Ethernet Fast Connect installation cables
Installing the PROFINET cable connector
Install the PROFINET connector according to the specifications in the "PROFINET
installation guideline (http://www.profibus.com/pall/meta/downloads/article/00328/)".
For more information, refer to the "PROFINET Cabling and Interconnection Technology
(http://www.profibus.com/pall/meta/downloads/article/00327/)" manual.
Pin assignment of the RJ45 connector
View of the RJ45 socket
Installing the cable holder
Install the supplied cable holder (see figure above).
1. Open the front door of the IM 153-4 PN interface module.
2. Insert the cable holder into the prepared cutout on the interface module.
3. Screw the cable holder firmly into place.
76
guideline (http://www.profibus.com/pall/meta/downloads/article/00328/)".
The following are suitable:
PROFINET RJ45 connector with
Fast Connect connection system,
180° cable outlet
The following are suitable:
Fast Connect standard cable
Fast Connect trailing cable
Fast Connect marine cable
conductor cross section for the supply voltage
2
6GK1901-1BB10-2AA0
6XV1840-2AH10
6XV1840-3AH10
6XV1840-4AH10
Terminal
1
2
3
4
5
6
7
8
Operating Instructions, 12/2008, EWA-4NEB780600602-08
Assignment
RD (Receive Data +)
RD_N (Receive Data –)
TD (Transmit Data +)
Ground
Ground
TD_N (Transmit Data –)
Ground
Ground
ET 200M