Order Numbers for the ET 200M
Manual
"SIMATIC NET PROFIBUS networks
(http://support.automation.siemens.com/WW/view/en/1971286)"
Configuration manuals
(http://support.automation.siemens.com/WW/view/en/10806846/133
300)
"S7-300 automation system, ET 200M distributed I/O device, fail-
safe signal modules
(http://support.automation.siemens.com/WW/view/en/19026151)"
FM 35x manual
(http://support.automation.siemens.com/WW/view/en/10805177/133
300)
Manual for the ET 200 in SIMATIC S5
In order to program and commission an ET 200M with
following manual with the order number 6ES5998-3ESx2.
Table B- 3
Manual for the ET 200 in SIMATIC S5
Manual
"ET 200 Distributed I/O System
(http://support.automation.siemens.com/WW/view/en/1142470)"
"COM PROFIBUS
(http://support.automation.siemens.com/WW/view/en/1498610)"
250
Contents
Introduction to PROFIBUS networks
•
Network configuration
•
Components for PROFIBUS networks
•
Introduction to the PCS 7 system philosophy
•
Description of the configuration of a system with
•
PCS 7
Description and technical data of the S7-300 I/O
modules in the intrinsically safe area
Description and technical data of the function
modules FM 35x (a separate manual for each FM)
COM PROFIBUS
Contents
Description of the master switching of the IM 308-C
•
for S5-115U, S5-135U and S5-155U
Description of the S5-95U with PROFIBUS DP
•
master interface
Handling the FB IM308C
•
COM PROFIBUS
Handling
•
Electronic manual on CD-ROM and constituent of the
COM PROFIBUS
(as of version 5.x)
Operating Instructions, 12/2008, EWA-4NEB780600602-08
you require the
ET 200M