Siemens SIMATIC ET 200M Operating Instructions Manual page 206

Interrupt, error and system messages
9.1 PROFIBUS DP
Error type Error text
11101 29 Error 1 in
B D
actuator /
sensor
11110 30 Error 2 in
B D
actuator /
sensor
11111 31 Channel
B D
temporarily
unavailable
See also
Structure of slave diagnosis (Page 191)
204
Meaning
Error 1 in a an HMI device that is connected to a module.
Error 2 in a an HMI device that is connected to a module.
e.g. due to calibration, firmware update, manual mode, etc.
Operating Instructions, 12/2008, EWA-4NEB780600602-08
Remedy
Correction in actuator /
sensor depending on
error message, HART:
Primary value outside
of limits
Correction in actuator /
sensor depending on
error message, HART:
Secondary value
outside of limits
Different, depending
on the cause;
e.g., wait until the
initiated function
(calibration, FW
update) is finished.
ET 200M