Assignment planning
3.5 Configuring the mechanical structure
Installation Dimensions of the Modules
You will find the installation dimensions of the modules for the S7-300 spectrum in the
"S7-300 automation system, module specifications
(http://support.automation.siemens.com/WW/view/en/8859629)" reference manual.
The installation dimensions of the IM 153-x interface module are specified in the "Technical
specifications of the IM 153-x (Page 231)" chapter.
Length of the Rails
Depending on the ET 200M installation you have, you can use the following rails:
Rail for ...
Standard
configuration
160 mm
482.6 mm
530 mm
–
830 mm
2000 mm
See also
Connecting shielded cables via a shield connecting element (Page 85)
Installing the DIN rail (Page 60)
42
Usable length for
modules
Module change
during operation
–
120 mm
482.6 mm
450 mm
530 mm
480 mm
620 mm
580 mm
–
780 mm
2000 mm
Cut to length required Fixing holes have to be
Remark
Comes with fixing holes.
drilled.
Operating Instructions, 12/2008, EWA-4NEB780600602-08
ET 200M