Siemens SIMATIC ET 200M Operating Instructions Manual page 183

I&M data
IM_REVISION_COUNTER
IM_PROFILE_ID
IM_PROFILE_SPECIFIC_TYPE
IM_VERSION
IM_Version_Major
•
IM_Version_Minor
•
IM_SUPPORTED
Maintenance data 1: (data record index AFF1 hex)
IM_TAG_FUNCTION
IM_TAG_LOCATION
Maintenance data 2: (data record index AFF2 hex)
IM_DATE
Maintenance data 3: (data record index AFF3 hex)
IM_DESCRIPTOR
Further explanations about identification and maintenance data can be found in the "From
PROFIBUS DP to PROFINET IO
(http://support.automation.siemens.com/WW/view/en/19289930)" programming manual
under chapter "Identification and maintenance".
ET 200M
Operating Instructions, 12/2008, EWA-4NEB780600602-08
Access
read (2 bytes) -
read (2 bytes) 0000
read (2 bytes) 0005 hex
read 0101 hex
(1 byte)
(1 byte)
read (2 bytes) 000E hex
Read / write -
(32 bytes)
Read / write -
(22 bytes)
Read / write YYYY-MM-DD HH:MM Enter the installation date of the module
(16 bytes)
Read / write -
(54 bytes)
8.7 Identification and maintenance data (I&M data)
Default
Provides information on parameter
modifications on the module.
Generic device
on interface modules
Provides information about the version of
the identification data.
(0101 hex = Version 1.1)
Provides information about the available
identification data. (I&M1 to I&M3)
Define a unique identifier for the module in
this record.
Define the installation location of the
module.
here.
Define a comment describing the module in
this record.
Functions
Description
181