Siemens SIMATIC ET 200M Operating Instructions Manual page 227

Technical Specifications
Technical Specifications
The technical specifications contain
● standards and approvals valid for the ET 200M,
● the technical data of the IM 153-x interface module,
● the dimensioned drawing of the IM 153-x interface module and
● the block diagram of the IM 153-x interface module.
Reference Manual
In the "S7-300 automation system, module specifications
(http://support.automation.siemens.com/WW/view/en/8859629)" reference manual you will
find
● The technical specifications of the modules.
● the general technical data like specifications for noise immunity of the modules as well as
● the mechanical and climatic ambient conditions for SIPLUS S7-300 modules (for use in
10.1 Standards and Approvals
CE Label
The ET 200M distributed IO device meets the requirements and protection objectives of the
following EU directives and complies with the harmonized European standards (EN) that
have been published for programmable controllers in the Official Journal of the European
Communities:
● 73/23/EEC Low-Voltage Directive (for electrical equipment)
● 89/336/EEC Electromagnetic Compatibility Directive (EMC Directive)
● 94/9/EU "Devices and protection systems for use as prescribed in potentially explosive
The EC Declarations of Conformity are available to the relevant authorities at the following
address:
Siemens Aktiengesellschaft
Industry Sector
IA AS RD ST
Postfach 1963
D-92209 Amberg
ET 200M
Operating Instructions, 12/2008, EWA-4NEB780600602-08
mechanical and climatic ambient conditions.
other operating conditions "outdoors").
areas" (Guidelines for Explosion Protection)
10
225