Siemens SIMATIC ET 200M Operating Instructions Manual page 273

PROFIBUS DP, 11
Network, 12
PROFIBUS module
Order number, 248
PROFIBUS standard, 228
PROFINET IO, 13
Network topology, 13
PROFINET IO Device, 98
Protection from electrical exposure, 48
Purpose of the operating instructions, 3
R
Radio interference, 47
Rail for module change during operation
Order Number, 247
Range of validity of these operating instructions, 3
RC network
1 MOhm for unearthed configuration, 246
integrated, 54
Recycling, 6
Redundancy
configuration rules, 44
Switchover time, 240
Time stamping, 140
Reference potential
ungrounded, 54
Regulations
on operating the ET 200M, 47
Removing and inserting
Refer to Module change during operation, 44
replacing
IM 153-1, 104
IM 153-2, 105
IM 153-2 FO, 105
Replacing
active bus module, 115
IM 153-4 PN, 109
replacing modules
is configured with Module Change During
Operation, 113
Replacing modules
is configured with Module Change During
Operation, 113
without the module change during operation
function, 111
Response Time, 239
Retrofitting
IM 153-1, 241
IM 153-2, 244
IM 153-2 FO, 244
ET 200M
Operating Instructions, 12/2008, EWA-4NEB780600602-08
S
Service life
SIMATIC Micro Memory Card, 124
Setup
for module change during operation, 44
for redundancy with the IM 153-2, 44
horizontal, 40
in an intrinsically safe area, 43
number of active bus modules, 46
number of modules, 46
vertical, 40
shield terminals, 85
Shielding termination element, 85
Siemens contact, 6
Signal module, 16
SIMATIC Micro Memory Card
available, 124
mounting, 125
replacing, 125
Service life, 124
SIMATIC TOP connect, 16
Simplex connector
Order Number, 248
Slave diagnosis, 194
Slot numbers, 68
SNMP, 183
Standard configuration
Installing, 63
Standards, 225
Starting behavior of the IM 153-1AA02
without response monitoring, 242
Startup
IM 153-1, 91
of the system, 47
Startup of ET 200M
PROFINET IO, 102
Station diagnosis, 216
Station statuses 1 to 3, 195
Status and error displays
IM 153-4 PN, 219
STOP IO controller
Diagnostics events triggered, 223
Strain relief, 83
Stripping lengths, 78
supply
grounded, 50
Supply
24 VDC, 48
Supply isolating switch, 48
Supply voltage, 48
Index
271