Parameter assignment / operation of HART field devices
The following is required for the parameter assignment / operation of HART field devices:
● EDD (for ET 200M) Version V1.1.8 or higher
● PDM V6.0 SP3
ET 200M
Operating Instructions, 12/2008, EWA-4NEB780600602-08
EDD (Electronic Device Description) is required to set up HART field devices. It is
PDM Device Library
included on the
Note
If an older PDM version is used together with the EDD indicated above, an error message
is not issued.
However, then HART field devices on HART input/output modules that plug into slots 12
to 15 cannot be operated.
3.3 Configuration possibilities for PROFIBUS DP
CD (as of Edition 2, dated 2007) supplied with PDM.
Assignment planning
37