Siemens SIMATIC ET 200M Operating Instructions Manual page 181

I&M data
IM_SUPPORTED
Maintenance data 1: Index 2 (data record 232)
TAG_FUNCTION
TAG_LOCATION
Maintenance data 2: Index 3 (data record 233)
INSTALLATION_DATE
RESERVED
Maintenance data 3: Index 4 (data record 234)
DESCRIPTOR
Changes in view of the former I&A data
Some of the content in the identification data for the I&A data has been amended in
accordance with the PROFIBUS Guideline. The access mechanism to the I&A data has
been supplemented in accordance with the PROFIBUS Guideline.
ET 200M
Operating Instructions, 12/2008, EWA-4NEB780600602-08
Access Default
read (2 bytes) 000E hex
read / write –
(32 bytes)
read / write –
(22 bytes)
read / write –
(16 Byte)
read / write –
(38 Byte)
read / write –
(54 Byte)
8.7 Identification and maintenance data (I&M data)
Description
Shows information about the I&M data. (Index 2 to
4)
Here enter a unique identification (applicable
throughout the system) for the module.
Enter the location of the module here.
Enter the installation date and, if necessary, the
respective time for the module.
reserved
Enter a comment regarding the module here.
Functions
179