FIGURE 11.2 Removing the Existing Seat Pan - Wheelchairs with Adjustable ASBA Seats
Removing the Flip Back Armrests
NOTE: For this procedure, refer to FIGURE 11.3 on page 39.
1. Unlock flip back armrest by pulling flip back armrest release lever into the
UNLOCKED (HORIZONTAL) position.
2. Remove the quick release pin that secures the flip back armrest to the wheelchair
frame.
3. Pull UP on the flip back armrest and remove the armrest from the arm sockets.
4. Repeat STEPS 1-3 for the opposite flip back armrest.
5. Remove the existing seat assembly. Refer to Removing the Existing Seat Assembly on
page 40.
Flip Back Armrest
Rear Arm Socket
Quick Release Pin
Front Arm Socket
Part No 1125031
SECTION 11—RETROFITTING A SEATING SYSTEM
FIGURE 11.3 Removing the Flip Back Armrests
LOCKED
(VERTICAL)
UNLOCKED
(HORIZONTAL)
Seat Frame
39
Formula
Socket Screws
Seat Pan
Seat Frame
Flip Back Armrest
Release Lever
™
PTO Plus Powered Seating