When To Charge Batteries - Invacare Formula PTO Plus Service Manual

SECTION 22—TDX BATTERIES

When to Charge Batteries

SPJ+ Joysticks
NOTE: For this procedure, refer to FIGURE 22.7.
The Information Gauge Display located on the front of the joystick housing provides the
state-of-battery charge, including notification of when the battery requires charging. It
also provides the following information to the user on the status of the wheelchair:
A. GREEN LEDs indicate well charged
batteries.
B. AMBER LEDs indicate batteries are
moderately charged. Recharge
batteries before taking a long trip.
C. RED LEDs indicate batteries are
running out of charge. Recharge
batteries as soon as possible.
MK6i MPJ+ Joystick
NOTE: For this procedure, refer to FIGURE 22.8.
The far right side of the display screen is the Battery Gauge Display (BGD). It provides
information on the remaining charge in the batteries.
At full charge, solid blocks fill in all ten
segments between E (Empty) and F (Full).
As the battery becomes discharged, the
segments will progressively disappear a
bar at a time until no segments appear
between E and F. At this level the user
should charge the batteries as soon as
possible.
™
Formula PTO Plus Powered Seating
Batteries
Empty
FIGURE 22.7 SPJ+ Joysticks
FIGURE 22.8 MK6i MPJ+ Joystick
182
Information Gauge Display
Batteries Full
Battery Charger/
Programming Port
Display
Screen
Battery Gage
Display
Part No 1125031