Invacare Formula PTO Plus Service Manual page 154

SECTION 20—M91 BATTERIES
9. Repeat STEPS 1-8 to install and connect the rear battery to the rear battery harness.
NEGATIVE (-)
Battery Cable
NEGATIVE (-)
Battery Terminal
FIGURE 20.3 Connecting/Disconnecting the Battery Wiring Harness
Disconnecting
NOTE: For this procedure, refer to FIGURE 20.3.
1. Remove the existing tie-wraps that secure the battery terminal covers to the battery
terminals.
2. Peel back RED battery terminal cover to expose RED battery cable connection to
battery terminal.
3. Peel back BLACK battery terminal cover from BLACK battery cable on front battery
or GREY battery terminal cover from BLACK battery cable on rear battery.
4. Remove the mounting screws and nuts that secure the POSITIVE (+) RED battery cable
to the POSITIVE (+) battery terminal/post as shown in FIGURE 20.3.
5. Remove the mounting screws and nuts that secure the NEGATIVE (-) BLACK battery
cable to the NEGATIVE (-) battery terminal/post as shown in FIGURE 20.3.
6. Set wiring harness aside.
7. Repeat STEPS 1-6 to disconnect the rear battery from the rear battery harness.
™
Formula PTO Plus Powered Seating
Nut
Mounting
Screw
Tie-Wrap
Battery
154
POSITIVE (+)
Battery Cable,
Mounting Screw with
Fuse Hardware
Tie-Wrap
Locknut
POSITIVE (+)
Battery Terminal
Part No 1125031