Removing/Installing The Actuator Shroud - Invacare Formula PTO Plus Service Manual

DETAIL "A" -
SELECTING THE
ACTUATOR
CONTROL SWITCH
MODE
Mode Icons
DETAIL "B" -
ACTUATOR
CONTROL SWITCH
MODE EXAMPLE
SCREEN
Operation
Icons
DETAIL "C" -
EXAMPLE SCREEN
DURING POWERED
SEATING
OPERATION
FIGURE 16.3 Using the MK6i MPJ+, MK6i PSR or MK6i PSF Joystick

Removing/Installing the Actuator Shroud

NOTE: For this procedure, refer to FIGURE 16.4 on page 108.
NOTE: Reverse this procedure to install the actuator shroud.
1. Remove the seat pan. Refer to Removing/Installing the Seat Pan on page 83.
2. Remove the two screws and washers securing the actuator shroud.
3. Remove the actuator shroud.
NOTE: Tilting the actuator shroud may be necessary.
Part No 1125031
Icon
Text
Actuator Control Switch Mode Icon
107
Formula
SECTION 16—TILT
Tilt Down Icon
(Move the joystick
right to use this
function)
™
PTO Plus Powered Seating