Adjusting The Tension Of The Center Mount Footplate - Invacare Formula PTO Plus Service Manual

SECTION 12—CENTER MOUNT FOOTRESTS
Before 2/15/07
NOTE: For this procedure, refer to FIGURE 12.5.
1. Loosen the footplate mounting screw
and move the footplate to the desired
angle.
NOTE: DO NOT remove the footplate
mounting screw.
2. Tighten the footplate mounting screw
to secure the footplate in the desired
position.
3. Repeat STEPS 1 and 2 for the other
footplate.

Adjusting the Tension of the Center Mount Footplate

NOTE: For this procedure, refer to FIGURE 12.6.
NOTE: The tension can be adjusted to increase
or decrease the rotation effort of the flip up
footplates.
1. Loosen the mounting screw on the
footrest angle hinge to decrease the
rotation effort.
NOTE: DO NOT remove the mounting screw.
2. Tighten the mounting screw to increase
the rotation effort.
3. Repeat STEPS 1 and 2 for the other
footplate.
™
Formula PTO Plus Powered Seating
Footplate
Mounting
Screw
NOTE: ASBA seat shown. Center mount
footrest installs the same way on adjustable
ASBA seats.
FIGURE 12.5 Adjusting the Center Mount
Footplate Angle - Before 2/15/07
Center
Mount
Footrest
Footrest
Angle
Hinge
Mounting Screw
NOTE: ASBA seat shown. Center mount
footrest installs the same way on adjustable
ASBA seats.
FIGURE 12.6 Adjusting the Tension of the
Center Mount Footplate
56
Center Mount
Footrest
Footplate
Release
Lever
Footplate
Part No 1125031