Di-C1.5 Training
Refresh Mode
While making prints with low coverage, the
developer is agitated with less toner
consumption and the toner carrier attraction
tends to increase. This may cause low image
density or poor transfer (white dots).
To prevent this, the coagulated toner or
overcharged toner must be consumed. To do
this, 'refresh mode' is done when the total
number of prints with low coverage gets to a
certain level.
In 'refresh mode', the machine makes a band for
each color to consume some of the toner in the
development unit and add fresh toner from the
cartridge.
Slide 157
SP 3516 controls this feature. Do not adjust.
157