Upgrade Recovery - IBM Storwize V7000 Unified Problem Determination Manual

What to do next
If the file system is managed by Tivoli Storage Manager for Space Management,
break down the restore into smaller file patterns or subdirectories that contain
fewer files.
If the file system is not managed by Tivoli Storage Manager for Space
Management, try to force a no-query-restore (NQR) by altering the path that is
specified for the restore. To do this action, include all files by putting a wildcard
("*") after the file system path:
# startrestore "ibm/gpfs0/*"
This example attempts a no query restore, which minimizes memory issues with
the Tivoli Storage Manager client because the Tivoli Storage Manager server does
the optimization of the file list. If you are still unable to restore a larger number of
files at the same time, break down the restore into smaller file patterns or
subdirectories that contain fewer files.

Upgrade recovery

This section covers the recovery procedures that relate to upgrade.
Error codes and recommendations when running the
applysoftware command
If any errors are posted after you issue the applysoftware command, see Table 43
and take the described course of action. Follow these guidelines:
1. Follow the actions in the order presented.
2. After each recommended fix, restart the upgrade by issuing the applysoftware
3. If the recommended actions fail to resolve the issue, call the IBM Support
288
Storwize V7000 Unified: Problem Determination Guide Version
command again. If the action fails, try the next recommended action.
Center.
Table 43. Upgrade error codes from using the applysoftware command and recommended
actions
Error Code
EFSSG1000I
EFSSG4100
EFSSG4101
EFSSG4101A
EFSSG4102
The applysoftware
command explanation
The command completed
successfully.
The command completed
successfully.
The required parameter was
not specified.
The applysoftware command
returned required parameter
not specified.
The software package does
not exist.
Action
None.
None.
Check the command and
verify that the parameters
are entered correctly.
Verify that the file actually
exists where specified. Also
verify that the command is
passing the correct location
parameters.