Serveraid M5000 Advanced Feature Key And - IBM Storwize V7000 Unified Problem Determination Manual

ServeRAID M5000
advanced feature key
Figure 29. ServeRAID M5000 advanced feature key and M5014 adapter
5. If you are instructed to return the feature key, follow all packaging instructions,
Installing an optional ServeRAID adapter advanced feature key
The following procedure is for a Tier 1 customer replaceable unit (CRU).
Replacement of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at
your request, you will be charged for the installation. Service agreements can be
purchased so that you can ask IBM to replace these units.
About this task
Note: Before running a procedure, refer to "Removing a file module to perform a
maintenance action" on page 55.
Procedure
1. To help you work safely with Storwize V7000 Unified file module, read the
2. Turn off the server and peripheral devices and disconnect the power cords.
3. Remove the cover, as described in "Removing the cover" on page 87.
4. Align the feature key with the connector on the ServeRAID adapter and push it
130
Storwize V7000 Unified: Problem Determination Guide Version
and use any packaging materials for shipping that are supplied to you.
safety information in "Safety" on page xi, "Safety statements" on page xiii, and
"Installation guidelines" on page 58.
into the connector until it is firmly seated. See Figure 30 on page 131 and
Figure 31 on page 132.
ServeRAID-M5014
adapter