IBM Storwize V7000 Unified Problem Determination Manual page 120

Procedure
1. To help you work safely with Storwize V7000 Unified file module, read the
2. Turn off the file module and peripheral devices, then label and disconnect both
3. Press down on the left and right side latches and pull the server out of the rack
4. Remove the cover, as described in "Removing the cover" on page 87.
5. Remove PCI riser-card assembly 2, as described in "Removing a PCI riser-card
6. Grasp the top of the air baffle and lift the air baffle out of the file module.
7. If you are instructed to return the microprocessor air baffle, follow all
Installing the microprocessor 2 air baffle
The following procedure is for a Tier 1 customer replaceable unit (CRU).
Replacement of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at
96
Storwize V7000 Unified: Problem Determination Guide Version
safety information in "Safety" on page xi, "Safety statements" on page xiii, and
"Installation guidelines" on page 58.
power cords and all external cables.
enclosure until both slide rails lock.
assembly" on page 105.
Attention: For proper cooling and airflow, replace all air baffles before you
turn on the file module. Operating the file module with any air baffle removed
might damage file module components.
packaging instructions, and use any packaging materials for shipping that are
supplied to you.