Components Identified As Customer Replaceable Units (Crus) And Field Replaceable Units (Frus) - IBM Storwize V7000 Unified Problem Determination Manual

86
Storwize V7000 Unified: Problem Determination Guide Version
Table 30. Components identified as customer replaceable units (CRUs) and field
replaceable units (FRUs)
Types of Explanation of
replaceable each type of
parts replaceable part
Tier 1 Customer Tier 1 CRUs are
replaceable units your responsibility.
(CRUs) If IBM installs a
Tier 1 CRU at your
request, you will
be charged for the
installation.
Service agreements
can be purchased
so that you can
ask IBM to replace
these.
Tier 1 Customer Tier 1 CRUs are
replaceable units your responsibility.
(CRUs) If IBM installs a
(continued) Tier 1 CRU at your
request, you will
be charged for the
installation.
Service agreements
can be purchased
so that you can
ask IBM to replace
these.
Procedures categorized under each type of
replaceable part
"Removing the cover" on page 87
"Installing the cover" on page 88
"Removing the battery" on page 89
"Installing the battery" on page 93
"Removing the microprocessor 2 air baffle" on page
95
"Installing the microprocessor 2 air baffle" on page
96
"Removing the DIMM air baffle" on page 98
"Installing the DIMM air baffle" on page 99
"Removing the fan bracket" on page 100
"Installing the fan bracket" on page 102
"Removing the IBM virtual media key" on page 103
"Installing the IBM virtual media key" on page 104
"Removing a PCI riser-card assembly" on page 105
"Installing a PCI riser-card assembly" on page 106
"Removing a PCI adapter from a PCI riser-card
assembly" on page 108
"Installing a PCI adapter in a PCI riser-card
assembly" on page 109
"Removing the two-port Ethernet adapter" on page
113
"Removing a Fibre Channel PCI adapter" on page
111
"Installing a Fibre Channel PCI adapter" on page
111
"Removing a 10-Gbps Ethernet PCI adapter" on
page 112
"Installing a 10-Gbps Ethernet PCI adapter" on page
112
"Installing the two-port Ethernet adapter" on page
114
"Removing and storing the full-length-adapter
bracket" on page 117
"Removing the SAS riser-card and controller
assembly" on page 117
"Installing the SAS riser-card and controller
assembly" on page 119
"Removing the ServeRAID SAS controller from the
SAS riser-card" on page 123
"Installing a ServeRAID SAS controller in the SAS
riser-card" on page 124
"Removing a hot-swap hard disk drive" on page
126
"Installing a hot-swap hard disk drive" on page 127
"Removing an optional ServeRAID adapter
advanced feature key" on page 128
"Installing an optional ServeRAID adapter advanced
feature key" on page 130
"Removing the serveRAID SAS controller battery
from the remote battery tray" on page 132
"Installing the serveRAID SAS controller battery on
the remote battery tray" on page 134