Unlocking The 3.5" Drive; Removing The 3.5" Drive - IBM Storwize V7000 Unified Problem Determination Manual

To replace the drive assembly or blank carrier, perform the following steps:
Procedure
1. Read the safety information to which "Preparing to remove and replace parts"
on page 224 refers.
2. Unlock the assembly by squeezing together the tabs on the side.
Figure 59. Unlocking the 3.5" drive
3. Open the handle to the full extension.
Figure 60. Removing the 3.5" drive
242
Storwize V7000 Unified: Problem Determination Guide Version